Printer (Nkg-901) - JRC JHS-770S Instruction Manual

Options operation
10.4

Printer (NKG-901)

The thermal head of the printer may be very hot after printing.
Perform paper replacement and head cleaning only after waiting for the head to
completely cool.
The printing paper used in this printer is a heat sensitive paper. Take the following
precautions when using this paper.
· Store the paper away from heat, humidity, or heat sources.
· Do not rub the paper with any hard objects.
· Do not place the paper near organic solvents.
· Do not allow the paper to come in contact with polyvinyl chloride film, erasers, or
adhesive tape for long periods of time.
· Keep away the paper from freshly copied diazo type or wet process copy paper.
1
2
4
■
Loading the printer paper
1 1 . .
1 .
Raise up the opening lever until it sound, and
pull it.
The paper cover will open.
2 2 . .
2 .
Insert the paper as shown in the diagram at right.
Position the paper such that the leading edge extends
outside the printer, and press center of top of the paper
cover to close it until it sounds.
Note
The printer is turned on and off simultaneously with the radiotelephone.
10-4
CAUTION
NKG-901
PRINTER
■
1. Paper cutter
2. Opening lever
3. Feed button
4. Paper cover
3
Do not touch it.