JRC JHS-770S Instruction Manual page 99

5.3 Settings for each Controller
The following describes the procedure regarding individual settings for controller such as LCD adjustment.
5.3.1 LCD adjustment
The LCD conditions for viewability are adjustable as follows.
■ ■
Procedure
1 1 . .
1 .
Press the key, and through hierarchical
MENU
menus, select the 9.3.1 LCD adjustment.
The screen as shown at right is displayed.
2 2 . .
2 .
Move the cursor to the desired item and press ENT.
Then alter the settings as appropriate with the
numeric keypad or jog dial and press ENT again.
Set each item within the ranges given below.
・ Contrast:
・ Dimmer:
・ Screen saver:
・ Timer:
5.3.2 Sound settings
The sound settings such as the click beep are adjustable as follows.
■ ■
Procedure
1 1 . .
1 .
Press the key, and through hierarchical
MENU
menus, select the 9.3.2 Sound.
The screen as shown at right is displayed.
2 2 . .
2 .
Move the cursor to the desired item and press ENT.
Then set the conditions as appropriate with the
numeric keypad or jog dial and press ENT again.
 The phone level can be set within 1 - 8.
 The notification level for such as a tone of the popup
screen can be set within 1 - 7.
1 - 11
1 - 10
ON/OFF
1 - 999 seconds
Settings & Registrations
9.3.1)LCD adjustment
1.Contrast : 06
2.Dimmer
Maximum : 10
Typical : 08
Minimum : 06
3.Screen saver : OFF
Timer(sec): 060
0.Back
9.3.1)LCD adjustment
1.Contrast : 06
2.Dimmer
Maximum : 10
Typical : 08
Minimum : 06
3.Screen saver : OFF
Timer(sec): 060
0.Back
9.3.2)Sound
1.Operation
- Internal speaker: ON
- Click : ON
2.Phone level adj. : 7
3.Notification level: 7
0.Back
9.3.2)Sound
1.Operation
- Internal speaker:
- Click : ON
2.Phone level adj. : 7
3.Notification level: 7
0.Back
ON
5-5