JRC JHS-770S Instruction Manual page 85

4 4 . .
4 .
After inputting the every information,
select Call and press ENT to make a
drobose call.
After checking the channel free, starts sending the
drobose call and the procedure displaying the
screen as shown at right.
5 5 . .
5 .
When receiving the acknowledgement from
the coast station, the screen shows as shown
at right.
 The ALM lamp starts blinking, and the
receiving alarm starts sounding.
 Press the
CANCEL
the alarm, then start the distress traffic.
In the case of receiving the drobose call, the call is handled as the distress relay call
Note
because the message form of the drobose is just the distress relay message.
key or ENT to silence
Operation
4-37