Checking Settings In The "Status" Menu; Checking Settings In The "Purge" Menu - Cornelius Ribbon Operator's Manual

4.3.2.1

Checking settings in the "Status" menu

The "Status" menu allows for the status of the unit to be checked.
1. Call up the "VMC Settings" menu (virtual machine control settings), see chapter 4.3.2,
page 26.
2. Press "Status".
3. Check the values.
– If the values are correct, continue with the next step.
– If the values are incorrect, please inform your ser-
vice partner.
4. Return to the service menu by pressing the "Exit" button.
4.3.2.2

Checking settings in the "Purge" menu

The "Purge" menu allows for the flow settings to be checked for each configured valve.
1. Call up the "VMC Settings" menu (virtual machine control settings), see chapter 4.3.2,
page 26.
2. Press "Purge".
3. Select the relevant dispensing time.
4. Place a cup under the dispensing nozzle.
5. Select the valve for which you want to check the flow
rate by pressing the required beverage symbol.
The valve opens and dispenses the beverage or the
cleaning liquid.
Notice!
Only an expert is allowed to set the values.
Cornelius Deutschland GmbH
Document no. TD0000000
Version: 19/10/2017, Index 3
4 Operation
Figure 22
Figure 23
Figure 24
Operator manual: Postmix tower
Ribbon
27