Calling Up And Checking The "Hmi Status" Menu - Cornelius Ribbon Operator's Manual

6. Check the dispensing quantity.
– If the dispensed quantity is correct, continue with the next step.
– If the dispensed quantity is not correct, please inform your service partner.
7. Perform this test on all valves.
8. After testing all valves, continue with the next step.
9. Return to the service menu by pressing the "Exit" button.
4.3.3

Calling up and checking the "HMI Status" menu

The "HMI Status" menu (user interface status) provides information relating to the power sup-
ply line.
1. Call up the service menu, see chapter 4.3.1, page 23.
2. Press "HMI Status" (user interface status).
3. Check the values.
– If the values are correct, continue with the next step.
– If the values are incorrect, please inform your ser-
vice partner.
Operator manual: Postmix tower
Ribbon
28
4 Operation
Figure 25
Figure 26
Cornelius Deutschland GmbH
Document no. TD0000000
Version: 19/10/2017, Index 3