How To Communicate Device With Pc; Software Installation Guide - Owon VDS6000 Series Quick Manual

5. How to Communicate Device with PC

to communicate the device with PC, it's a must to install software firstly.
i. software installation guide
i). full installation
Target users: general PC oscilloscope users, and programmers get secondary
development need
Installation solution -
On the basis that NI-VISA driver or similar VISA driver already worked normally onto

PC, to install "VDS6000Series_PC_Software.exe" from accompanying CD which
comes along with device.
Provided no proper VISA driver found onto target PC, as first step, to install

"ni-visa_19.5_online_repack.exe" from accompanying CD which comes along with
device.
(This .exe file will instruct the users to download NI-VISA driver, and the users could choose necessary NI
package kit in the process as well.)
The second step is to run "VDS6000Series_PC_Software.exe".
Note: According to the user preferences, different version NI-VSA available via -
visit www.ni.com through PC browser, type "NI-VISA" onto search column, click NI-VISA Download web
linkage from searching results, in accordance with the PC operation system and its version, to choose
preferred suitable NI-VISA version.
ii). simple installation
Target users: general PC oscilloscope users
Installation process -
To install Runtime version NI-VISA driver from accompanying CD which comes along with
device firstly, after that, to run "VDS6000Series_PC_Software.exe".
iii). minimum installation
Target users: PC oscilloscope users who only need to communicate the device with PC
via direct network cable (no need USB communication)
Installation process -
To run "VDS6000Series_PC_Software.exe" from accompanying CD which comes along
with device directly.
Note: The users could refer to
PC by direct network cable" under VII. Device Operation from e-format user manual.
xiii.how to use socket connection
- 7 -
for "when the device communicates with