Table of Contents
Advertisement
3. Communication Interface Introduction
i. power input: for AC-DC adapter
ii. USB host: for Wi-Fi extension
iii. USB device (type-C): for PC communication
Note: when the device powered by PC USB connection cable (via USB communication interface of PC,
with PC powered by AC power source), without adapter connection, the input current should reach 1.5A
or above.
iv. LAN: for PC communication within network
v. Built-in Signal (3.3 V/1 kHz) Output: for probe compensation
vi. MULTI: for signal output of function generator
vii. CH2: for signal input
viii. CH1: for signal input
Figure 3- 1. Communication Interface of the Device
- 5 -
Advertisement
Table of Contents
