Device General Checking - Owon VDS6000 Series Quick Manual

Hide thumbs Also See for VDS6000 Series:

Table of Contents

4. Device General Checking

Before working the device, Lilliput highly recommend to check the device as per following

steps:

i. to check any package deformation, breakage exists

Provided any deformation, breakage of package appears, firstly, take photos about the

package for good records; secondly, open the package, to check whether device in good

shape, if not, take photos for good records, then back to your direct buying source, or back to

Lilliput so as to get timely solution.

ii. to check any physical defect / damage towards the device

Provided any obvious physical defect / damage towards device surface / communication

interface / protection cover found, firstly, take photos about the defect / damage good records,

then back to your direct buying source, or back to Lilliput so as to get timely solution.

iii. to check whether device accessories is complete

The complete accessory been listed onto page 15 "Appendix I. Device Accessory List", please

check whether any accessory is missing, or with obvious physical defect, provided yes, take

photos for records firstly, then back to your direct buying source, or back to Lilliput so as to get

timely solution.

Provided the result of device general checking is positive, then congratulations to start working

the device from now on.

- 6 -

Table of Contents