Table of Contents
Advertisement
To avoid body injury, and to avoid device damage, its accessory or communicated facility
damage, before working the device, Lilliput strongly recommend to read the following safety
information.
Warning
To avoid any potential short circuit or electric shock, DO use original local standard, or
manufacturer's recommended power adapter.
Warning
The channels of the device are non-isolated electrically. When working the device, to avoid
short circuit, the ground of two probes are NOT allowed to connect to 2 different non-isolated
DC level.
The diagram of the device ground wire connection goes in -
When device powered by PC USB connection cable (with PC powered by AC power source),
the diagram of the ground wire connection goes in -
It is NOT allowed to measure AC power when the device been powered by AC power source
through the adapter, or when the device powered by PC USB connection cable (via USB
communication interface of PC, with PC powered by AC power source).
- 3 -
Advertisement
Table of Contents
