Rear Tow Hitch (Option) - Landoll 6230 Operator's Manual

ASSEMBLY INSTRUCTIONS
REAR TOW HITCH
CLAMP PLATE
REAR TOW HITCH
PLATE
REAR TOW HITCH
ASSEMBLY
rear hitch assy

Rear Tow Hitch (Option)

1. Attach the rear tow hitch assembly to the rear bar of
the center frame using rear tow hitch clamp plates,
5/8-11 x 6-1/2 hex head cap screws, and hex lock
nuts (See Figure 3-24.) The tow hitch should be
centered on the back bar of the frame.
2. Attach coupler mount bracket to the left side of the
rear tow hitch plate using 1/2-13 x 1-1/4 hex head
cap screws and hex lock nuts (See Figure 3-25.)
3. Pull tandem adapter harness through coupler mount
bracket and attach with 5/16-18 x 1 hex head cap
screws and hex lock nuts.
3-34
Figure 3-24: Rear Tow Hitch Installation
4. Connect female couplers, coupler dust plugs, 3/8 x
5. Connect tandem adapter harness to the main
6. The hydraulic hoses will route along the left side of
5/8-11 X 6-1/2 HEX
HEAD CAP SCREW
5/8-11 HEX LOCK
NUT
318 hose assemblies, and male couplers. Attach
hose assemblies between coupler mount bracket
and coupler plate using 3/8-16 x 2-1/2 hex head cap
screws and hex lock nuts.
warning light harness and the enhanced lighting
module.
the rear tow hitch, over the top of the back frame
tube on the disc and then follow the rest of the hoses
and hose loops to the front of the disc so they can
plug directly into the tractor.
F-440-0110 Edition