Emerson Mentor MP Advanced User's Manual page 89

Parameter Keypad and
structure display
6.21 Powered-up time: hours.minutes
Bit SP
Coding
Range 0 to 23.59 Hours.Minutes
Update rate Background write
See description for Pr 6.20.
6.22 Run time: years.days
Bit SP
Coding
Range 0 to 9.364 Years.Days
Update rate Background write
The run time clock increments when the drive output stage is active to indicate the number of minutes that the drive has been running since leaving
the manufacturing plant. This clock may be used for time stamping the trip log if Pr 6.28 = 1.
This parameter is used in conjunction with Pr 6.23.
6.23 Run time: hours.minutes
Bit SP
Coding
Range 0 to 23.59 Hours.Minutes
Update rate Background write
See description for Pr 6.22.
6.24 Energy meter: MWh
Bit SP
Coding
Range ±9999 MWh
Update rate Background write
Pr 6.24 and Pr 6.25 form the energy meter that indicates energy supplied to/from the drive in MWh and kWh.
For motor control modes a positive value indicates net transfer of energy from the drive to the motor. The energy meter is reset and held at zero when
Pr 6.17 is one.
This parameter is used in conjunction with Pr 6.25.
6.25 Energy meter: kWh
Bit SP
Coding
Range ±999 kWh
Update rate Background write
See description for Pr 6.24.
6.26 Running cost
Bit SP
Coding
Range ±32,000
Update rate Background write
Instantaneous read out of the cost/hour of running the drive. This requires Pr 6.16 to be set up correctly.
Mentor MP Advanced User Guide
Issue Number: 1
Parameter description
Parameter x.00
format
FI DE Txt VM DP ND
2 1
FI DE Txt VM DP ND
3 1
FI DE Txt VM DP ND
2 1
FI DE Txt VM DP ND
1 1
FI DE Txt VM DP ND
2 1
FI DE Txt VM DP ND
1 1
www.controltechniques.com
Advanced parameter
descriptions
RA NC NV PT US RW BU
1 1 1
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1
Serial comms
Performance
protocol
PS
1
PS
1 1
PS
1 1
PS
1
PS
1
PS
Menu 6
89