Install The Left And Right Steering Hoses - Raven SmarTrax Installation Manual

INSTALL THE LEFT AND RIGHT STEERING HOSES

FIGURE 14. Left and Right Steering Hoses Installed
Installed -6 JIC M/M/F
Swivel Run Tee Adapter
Fittings (P/N 333-0012-043)
1. Locate the machine's left and right steering hoses that run over the top of the engine and down to the tee
fittings above the front axle.
2. Disconnect the machine's left steering hose from the existing tee fitting.
3. Install a -6 JIC M/M/F swivel run tee fitting (P/N 333-0012-043) on the machine's existing tee fitting.
FIGURE 15. Left Steering Hoses Installed
Installed Hydraulic Hose
(P/N 214-1001-176)
Connected to Machine's
Left Steering Hose
Installed Hydraulic Hose
Connected to Port A1 of
Dual POCI Valve
4. Install one end of the supplied hydraulic hose (P/N 214-1001-176) on the opposite end of the installed tee
fitting.
5. Connect the other end of the installed hydraulic hose to the fitting installed in Port A of the SmarTrax valve
(P/N 334-0003-088).
P/N 016-5035-001 Rev. A
HYDRAULIC SYSTEM INSTALLATION
Machine's Right Steering
Hoses
Machine's Steering Hoses
Machine's Left Steering
Hose
Installed Hydraulic Hose
(P/N 214-1001-176)
Connected to Port A of
SmarTrax Valve
-6 JIC M/M/F Swivel Run Tee
Fitting (P/N 333-0012-043)
23