Raven SmarTrax Installation Manual page 25

FIGURE 11. Pressure Hose Installed on Machine's Hydraulic Pump
3. Install the straight end of the supplied hydraulic hose (P/N 214-1001-175) on Port P of the load sense priority
valve (P/N 334-0003-072).
4. Connect the 90° end of the installed hydraulic hose to the open port of the hydraulic pump.
5. Install the -8 JIC end of the supplied hydraulic hose (P/N 214-1001-178) to the fitting installed in Port EF of the
priority valve.
FIGURE 12. Machine's Pressure Hose Connected to Installed Pressure Hose
6. Remove the plug from the machine's pressure hose and connect it to the -6 JIC end of the installed hydraulic
hose using a -6 JIC M/M straight adapter fitting (P/N 333-0012-250).
P/N 016-5035-001 Rev. A
HYDRAULIC SYSTEM INSTALLATION
21