Install Fittings In The Smartrax Valve - Raven SmarTrax Installation Manual

C 3
HAPTER

INSTALL FITTINGS IN THE SMARTRAX VALVE

Before mounting the SmarTrax valve (P/N 334-0003-088) on the machine, install the proper fittings in the valve.
This prepares the valve for installation and simplifies the hose connection process later in the procedure. Refer to
the figure and table below to install the fittings in the proper ports of the SmarTrax valve.
FIGURE 1. Fittings Installed in SmarTrax Valve
Fitting - -6 JIC (M) to -8 SAE O-Ring (M) Straight Adapter
Fitting - -6 JIC M/M/F Swivel Run Tee Adapter
Fitting - -4 SAE O-Ring (M) Internal Hex Plug
Fitting - -6 ORB to -6 JIC (M) Straight Adapter
14
The appearance of the SmarTrax hydraulic valve
may vary slightly from the images contained in
this manual. However, the fittings, hose
connections, and cable connections remain the
same.
Fitting
NOTICE
Part Number
333-0012-046
333-0012-043
333-0012-051
333-0012-045
GVM Mako SmarTrax™ Installation Manual
Port
P, T
P, T
PS
LSPV,
LS STEER