Parametrizations; The Parameter Memory; The Parametrizing Program; Can Module (Optional) - Festo SEC-AC-305 Fitting And Installation Instructions

1. Summary of components
1.8

Parametrizations

1.8.1 The parameter memory

1.8.2 The parametrizing program

1.8.3 CAN module (optional)

1.8.4 PROFIBUS module (optional)

Festo P.BE−SEC−AC−HW−EN en 0511c
The SEC−AC possesses two memory ranges in which it stores
parameters. The FLASH memory is used for parameters which
are loaded when the controller is switched on or after RESET.
These parameters are retained even when the power supply
is switched off. The internal memory (RAM) is used for para
meters which are currently used for controlling. These para
meters can be accessed with the parametrizing program.
The FLASH technology also enables a software update (e.g.
for customer−specific software) to be loaded into the RS 232
at a later data.
The parametrizing program is a program for parametrizing,
controlling and monitoring the operation of the SEC−AC via
communication interfaces. It can be used with every AT−com
patible PC as from 80486−processor with at least 16MB main
memory, providing it is running with WINDOWS 95, 98 or
WINDOWS NT. User−friendly operation under WINDOWS also
facilitates work for users with only limited EDP knowledge.
The optional CAN module operates in accordance with
CANopen specifications with the CIA−DS 402 positioning pro
file.
The optional PROFIBUS module operates in accordance with
current PROFIBUS−DP specification of the PROFIBUS Nutzer
organisation (PNO) (PROFIBUS user organisation).
1−13