Olympus MVX10 Instructions Manual page 45

Fig. 40
@
²
³
Fig. 41
8
Mounting the Tilting Trinocular Head
²
1. Using the Allen screwdriver, loosen the clamping screw @ of the coaxial
³
fluorescence illuminator.
2. Fit the round dovetail ² on the bottom of the trinocular head into the
mount dovetail ³ of the illuminator and tighten the clamping screw.
@
9 Mounting the Eyepieces
1. Remove the eyepiece dust caps @ and loosen the eyepiece clamping
knobs ² completely.
2. Gently insert the eyepiece (WHN10X-H) ³ into the left and right eye-
piece sleeves all the way until they stop.
3. Tighten both eyepiece clamping knobs ².
MVX10
(Fig. 40)
(Fig. 41)
41