Nexcom ICES 670 Series User Manual page 46

Chapter 3: BIOS Setup
System Agent (SA) Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Main Chipset Boot
System Agent Bridge Name
System Agent RC Version
VT-d Capability
VT-d
Graphics Configuration
NB PCIe Configuration
Memory Configuration
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
VT-d
Enables or disables VT-d function on MCH.
Graphics Configuration
Configures the graphics chip settings.
NB PCIe Configuration
Configures the NB PCIe settings.
Memory Configuration
Configures the memory settings.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Security
Haswell
Check to enable VT-d function
on MCH.
1.5.0.0
Supported
[Enabled]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Graphics Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Main Chipset
Graphics Configuration
Primary Display
Primary PEG
Primary PCIE
Internal Graphics
Aperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
LCD Control
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or
select SG for switchable Gfx.
Primary PEG and Primary PCIE
Select which PEG and PCIE should be the primary display
Internal Graphics
Keep IGD enabled based on the setup options.
Aperture Size
Configures the Aperture size.
33
Save & Exit
Boot Security
Select which of IGFX/PEG/PCI
Graphics device should be
[Auto]
Primary Display Or select SG
for Switchable Gfx.
[Auto]
[Auto]
[Auto]
[256MB]
[32M]
[256MB]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
ICES 670 User Manual