Nexcom ICES 670 Series User Manual page 35

Chapter 3: BIOS Setup
IT8518SEC Second Super IO Configuration
This section is used to configure serial ports 0 and 1 of the second super IO.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
IT8518SEC Second Super IO Configuration
IT8518SEC Second Super IO Chip IT8518SEC SecondIo
Serial Port 0 Configuration

Serial Port 1 Configuration

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
IT8518SEC Second Super IO Chip
Displays the second Super I/O chip used on the board.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Serial Port 0 Configuration
This section is used to configure serial port 0.
Set Parameters of Serial Port
0 (COMA)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables the serial port.
22
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Serial Port 0 Configuration
Serial Port [Disabled]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
ICES 670 User Manual