Nexcom ICES 670 Series User Manual page 38

Chapter 3: BIOS Setup
Serial Port 2 Configuration
This section is used to configure serial port 2.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Serial Port 2 Configuration
Serial Port [Enabled]
Device Settings IO=3E8h; IRQ=10;
Change Settings [IO=3E8h; IRQ=10;]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Serial Port 3 Configuration
This section is used to configure serial port 3.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
25
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Serial Port 3 Configuration
Serial Port [Enabled]
Device Settings IO=2E8h; IRQ=11;
Change Settings [IO=2E8h; IRQ=11;]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
ICES 670 User Manual