Frame/Checking Hoses Of The Braking System; Hose Check - Benelli TRK 502 Service Station Manual

FRAME/CHECKING HOSES OF THE BRAKING SYSTEM

The following procedure applies to all brake hoses and brake
hose clamps.
Check:
• the path of the hose of the front "A" and rear "B" brake.
If there is any cracking/damage/wearing trace, replace.
Check:
• The hose clamp of the front brake "C" Fig. A. If loosened,
tighten the clamp bolt.
Check:
• The hose clamp "D" of the rear brake Fig. B. If loosened,
tighten the clamp bolt.
Torque 25 N*m
Keep:
• The motorcycle in a upright position.
Activate:
• The brake several times.
Recheck:
• The brake hose. If there is any brake fl uid leakage, replace
the damaged hose.

HOSE CHECK

A
C
B
D
3 - 31
A
B