Frame/Brake Pad Check; Checking Wear Of Front/Rear Brake Pads - Benelli TRK 502 Service Station Manual

The following procedure applies to brake pads.
Activate:
• the brake
Check:
• The front brake pads Fig. A.
• The rear brake pads Fig. B.
• The wear limit for the front/rear brake pads.
If the wear reaches the limit, please replace all brake
pads.
Pads
Front
Rear
NOTE:__________________________________________
For replacing the pads, refer to the chapter "Frame", section
"Removal/installation of front brake pads".
3 - 30

FRAME/BRAKE PAD CHECK

CHECKING WEAR OF FRONT/REAR BRAKE PADS

Wear limit (A)
1 mm
1 mm
A
B