Benelli Tornado TRE1130 Owner's Manual
  1. Manuals
  2. Brands
  3. Benelli Manuals
  4. Motorcycle
  5. Tornado Naked Tre 1130
  6. Owner's manual

Benelli Tornado TRE1130 Owner's Manual

Hide thumbs Also See for Tornado TRE1130:
Table of Contents

Advertisement

Quick Links

See also: Use and Maintenance
� � � � � �� �� � � � � �
Tornado Tre 1130

Advertisement

Table of Contents
loading

Related Manuals for Benelli Tornado TRE1130

Summary of Contents for Benelli Tornado TRE1130

  • Page 1 � � � � � �� �� � � � � � Tornado Tre 1130...

  • Page 2: Table Of Contents

    5.3.2 Adjusting the rearview mirrors ....42 Ignition switch and steering lock .....21 Adjustments that has to be done by a Gear lever ..........23 Benelli Authorized Workshop ....43 Instruments and warning lights ....24 5.4.1 Clutch lever play ........43 Tornado Tre 1130 Adjusting the front suspension ....44...

  • Page 3: General Information

    Benelli Q.J. reserves the right to make any changes, whenever deemed, to its products and to this manual. Wherever you will find any dissimilarity between what is written on tihs Owner’s Manual and the specific fitting-out of your update version of the Owner’s Manual,...

  • Page 4: Identification Data

    Tornado Tre 1130 1) vehicle identification number 2) engine serial number 3) homologation data Identification data 1. vehicle identification number 2. engine serial number 3. homologation data We recommend writing down the main numbers in the spaces provided below. FRAME No. ZBN ____________________ ENGINE No.

  • Page 5: Safety Information

    Tornado Tre 1130! For any necessity or further information don’t hesitate to apply to your Benelli Distributor or to the nearest Benelli Authorized Workshop. You can find the Benelli Distributor and the Benelli Authorized Workshop list on the web site www.benelli.com or calling the Benelli Customer Service dialling +39 0721.418740.

  • Page 6: Vehicle Load

    As soon as possible and, kowever, before using your motorcycle after an accident, even if there are not any visible damages, it is necessary to have it inspected by a Benelli Authorized Workshop, in order to erify the absence of defects and/or damages that the owner could not be able to detect.

  • Page 7: Use Of The Vehicle In Competitions

    To meet the passionate drivers numerous requests, Benelli Q.J. has designed a number of special components for use in competitions and/or sporting events. The use of such components is strictly limited to areas closed to traffic. Failure to observe this restriction constitutes a breach of the Highway Code for which Benelli Q.J. cannot be held responsible.

  • Page 8: Protective Clothing

    Tornado Tre 1130 When riding down long hills, reduce the speed of your motorcycle by closing the throttle and using a low gear ratio to take advantage of engine braking. Use the front and rear brakes as little as possible to maintain your speed, in order to prevent brake overheating and fade.

  • Page 9: Suggestions Against Theft

    Tornado Tre 1130 WARNING Protective clothes do not afford complete protection against the risk of personal injury in the event of an accident. It is therefore essential not be deceived by the false sense of security that you might perceive by wearing protective clothing. When riding, always adopt a cautious attitude and follow the recommendations given in the previous paragraphs.

  • Page 10: Controls And Instruments

    Tornado Tre 1130 Controls and instruments Location of controls and instruments Instruments and warning lights Clutch lever Front brake lever Left handlebar electrical controls Throttle twist grip Ignition switch and steering lock Right handlebar electrical controls Fuel tank cap Left side Left side Left side Left side...

  • Page 11: Handlebar Controls, Left Side

    Tornado Tre 1130 Handlebar controls, left side Clutch lever Move towards/away from the handgrip to release/engage the clutch. Control Lights Lights on Low or high beam on Low/high beam button Shift the light switch to the position Button not pressed in : low beam Button pressed in : high beam...

  • Page 12: Handlebar Controls, Right Side

    This system allows the engine starting when the clutch is pushed. To avoid damaging the electrical equipment, be sure not to hold down the button for longer than 5 consecutive seconds. If, after some attempts, the engine does not start, contact your authorized Benelli service center.

  • Page 13: Ignition Switch And Steering Lock

    Tornado Tre 1130 Ignition switch and steering lock WARNING Do not attach a ring or any other object to the ignition key as they may hinder the steering action. Never attempt to change the switch functions while riding,as you may lose control of the vehicle. Always check the absence of any restric- tion in the steering action befero you ride.

  • Page 14: Gear Lever

    Tornado Tre 1130 Gear lever WARNING Only operate the change gear with the clutch lever fully pulled. 6° 6° 5° 5° 4° 4° 3° 3° 2° 2° The N (neutral) position is indicated by the warning light on the instrument panel. To change into first gear, push the lever down.

  • Page 15: Tornado Tre 1130

    • Improve our riding skills PROTECT THE ENVIRONMENT Benelli Q.J., in order to protect the interests of the community, awakens the Customers and the Technical Assistance operators to use the vehicle and dispose of its replaced parts respecting the laws in force concerning environmental pollution and waste disposal and recycling.
  • Page 16 If any of the above-mentioned parts shows a failure during its operation, have it controlled and repaired by a Benelli Authorized workshop before using the motorcycle. Check fluid level.
  • Page 17 Tornado Tre 1130 Running-in Failure to observe the indications provided below can reduce performance and shorten the life of the motorcycle. Running-in is generally considered to apply only to the engine. In fact, it should be regarded as an essential phase for other important parts such as the tyres, the brakes and the drive chain.
  • Page 18 Tornado Tre 1130 Resetting the trip mileage counters Press twice the “Mode” button to reset the “Trip” function value. NOTE: The instrument panel has an integrated memory which retains all the parameters even when the engine is not running. Except for the clock, which is reset, all the parameters are retained even when the battery is disconnected.
  • Page 19 Tornado Tre 1130 Saddle disassembly driver Insert the key. Press the end part of the saddle and, at the same time, turn the key clockwise. Slightly lift the saddle from the rear, slide it backwards and remove it. Keys supplied Saddle disassembly passenger Insert the key.
  • Page 20 Tornado Tre 1130 4.10 Refuelling Lift the dust cover. Insert the key into the lock, rotate it clockwise and lift the tank cap. After refuelling, press down the tank cap while rotating the key clockwise to facilitate the locking. Then release the key and remove it.
  • Page 21 Tornado Tre 1130 4.11 Starting the engine As you turn the ignition switch to the ON position, the instruments and the warning lights will go through the self-diagnostic cycle; during this phase, make sure that all the warning lights on the dashboard come on. One of the following conditions must be verified, in order that the ignition switch system allows engine starting: The gears are in neutral.
  • Page 22 All adjustments must be performed when the vehicle is stationary and, where not otherwise provided in this manual, they have to be done only by Benelli Authorized Workshop; in fact, some of these operations can cause a danger for the user’s safety if they are not properly done or if they are unappropriate.
  • Page 23 Tornado Tre 1130 Recapitulatory table of adjustments Authorized Dealer Adjusting rear suspension spring preload TYPE OF ADJUSTMENT COMPETENCE Adjusting rear Front brake lever User suspension compression Authorized Dealer adjustment damper hydraulic device Clutch lever adjustment User Hydraulic system braking regulation in back - wheel Authorized Dealer Rearview mirrors User...

  • Page 24: Adjusting The Front Suspension

    Tornado Tre 1130 Adjustments that has to be done by a Benelli Authorized Workshop WARNING – The following adjustments are reserved to the Benelli Authorized Workshops. Never perform adjustment while riding. B 5.4.1 Clutch lever play Remove the adjustment cover cap.

  • Page 25: Adjusting Front Suspension Spring Preload

    Tornado Tre 1130 5.5.1 Adjusting front suspension spring preload Adjusting of the spring preload is performed by counting the rule turns (A), either clockwise and anticlockwise. Turns Turn clockwise for stiffer preload adjustment. Turn anticlockwise for softer preload adjustment. WARNING It is essential that the adjusters of both fork rods are adjusted to the same position.

  • Page 26: Adjusting The Rear Suspension

    Tornado Tre 1130 Adjusting the rear suspension Compression damper hydraulic device Hydraulic system braking at high speed compression Spring preload Rebound damper hydraulic device Tornado Tre 1130 WARNING The high temperature of the exhaust pipes can cause burns. Before adjusting the rear suspension, shut off the engine and wait until the exhaust pipes have thoroughly cooled.

  • Page 27: Adjusting Rear Suspension Spring Preload

    Tornado Tre 1130 5.6.1 Adjusting rear suspension spring preload Adjust the spring preload by means of the two ring nuts (A and B) shown in the figure. Unloose the ring nut (A) and adjust the preload using the ring nut (B). Turn clockwise for a stiffer preload.

  • Page 28: Maintenance

    To replace or top up the lubricants and fluids of your motorcycle, use only the suitable products. PROTECT THE ENVIRONMENT Benelli Q.J., in order to protect the interests of the community, awakens the Customers and the Technical Assistance operators to use the vehicle and dispose of its replaced parts respecting the laws in force concerning environmental pollution and waste disposal and recycling.

  • Page 29: Tables Of Scheduled Maintenance

    Owner’s Manual. In any other case have the operations performed by a Benelli Authorized Workshop, whose list is available on the web site www.benelli.com or calling the Benelli Coustomer Service dialling +39 0721.418740.
  • Page 30 Tornado Tre 1130 1000 Km 11.000 Km 21.000 Km 31.000 Km 41.000 Km 0 Km (621 mi) Annual (6.836 mi) (13.051 mi) (19.266 mi) (25.481 mi) Component Chek or maintenance job (0 mi) 1° Running-in Check Before delivery Service Service Service Service Service...
  • Page 31 Tornado Tre 1130 1000 Km 11.000 Km 21.000 Km 31.000 Km 41.000 Km 0 Km (621 mi) Annual (6.836 mi) (13.051 mi) (19.266 mi) (25.481 mi) Component Chek or maintenance job (0 mi) 1° Running-in Check Before delivery Service Service Service Service Service...
  • Page 32 Tornado Tre 1130 1000 Km 11.000 Km 21.000 Km 31.000 Km 41.000 Km 0 Km (621 mi) Annual (6.836 mi) (13.051 mi) (19.266 mi) (25.481 mi) Component Chek or maintenance job (0 mi) 1° Running-in Check Before delivery Service Service Service Service Service...

  • Page 33: Tools And Accessories Supplied

    Tornado Tre 1130 1000 Km 11.000 Km 21.000 Km 31.000 Km 41.000 Km 0 Km (621 mi) Annual (6.836 mi) (13.051 mi) (19.266 mi) (25.481 mi) Component Chek or maintenance job (0 mi) 1° Running-in Check Before delivery Service Service Service Service Service...

  • Page 34: Table Of Lubricants And Fluids

    For the availability of the suggested product, Benelli Q.J. suggests to directly apply to the Authorized Dealers or Workshops. If the above described lubricant is not available, Benelli Q.J. suggests to use a fully synthetic engine oil having characteristics equal or better than the ones prescribed in the following standards: •...

  • Page 35: Topping Up The Engine Oil Level

    Tornado Tre 1130 6.4.1 Topping up the engine oil level Oil filler plug To top up the engine oil level, remove the oil filler plug and pour an appropriate amount of engine oil of the recommended type. Never exceed the MAX level mark. At the end of the operation, place back the oil filler plug.

  • Page 36: Checking The Coolant Level

    Topping up the coolant level WARNING This operation has to be performed only by a Benelli Authorized Workshop. Perform the topping up of the coolant when the engine is off and cold. Never attempt to remove the coolant filler cap when the engine is hot, in order to avoid the risk of burns.

  • Page 37: Checking The Wear Of The Brake Pads

    If the brake pads are excessively worn out, the effectiveness of the braking system decreases, increasing the risk of accidents. Check frequently, from a Benelli Authorized Workshop, the wear and tear of the linings and, wherever need, make them replaced.

  • Page 38: Checking The Brake Fluid Level

    The level of the brake fluid decreases as the brake pads wear down. Ensure that the fluid level is always between the MAX and MIN marks. If the level falls below the MIN mark, contact a Benelli authorized service center and have the brake system overhauled.

  • Page 39: Checking The Tires And Rims

    If you make a provisional or emergency repair to a tyre, you must ride at very low speed until you reach the nearest Benelli authorized service center and have the tyre replaced. With a provisionally repaired tyre, never exceed 60 km/h (37.2 Mph).

  • Page 40: Checking Of The Rims And The Wheel Rims

    Before riding, always verify the absence of cracks, bending or buckling on the wheel rims. WARNING If you find that the wheel rim is damaged, have it replaced by a Benelli authorized service center. Never attempt to repair the wheel rim, even in case of slight damage.

  • Page 41: Cleaning

    Correctly dispose of exhaust kerosene, in order to avoid environmental pollution. If you are not sure that you can use kerosene in complete safety, don’t use it and, when you can go to a Benelli authorized service center ask for the drive chain cleaning.

  • Page 42: Replacing The Fuses

    Replacing the fuses The replacement of the fuses has to be performed only by a Benelli authorized service center. Only in case of extreme urgency and if it is not possible to have a specialized tech- nical assistance, the operation can be carried out by the owner according to the indications provided below.

  • Page 43: Battery

    In case of prolonged inactivity, to avoid shortening the life of the battery, it is essential to have it recharged by a Benelli authorized service center every 4-5 months, in order to guarantee its life in time.

  • Page 44: Prolonged Inactivity

    Tornado Tre 1130 6.14 Prolonged inactivity If the motorcycle is not to be used for a long period, contact a Benelli authorized service center to have the following operations carried out: - Empty the fuel tank. - Remove the battery and store it in a suitable place.

  • Page 45: Technical Information

    Technical information Benelli Q.J. reserves the right to make any changes to its models on the purpose of constantly conform them to the technological advance. Therefore the technical data that are shown below, can be different from those that can be checked on the vehicle.
  • Page 46 Tornado Tre 1130 Maximum net power 119 KW (163 CV) IGNITION - POWER SUPPLY to 10500 rpm “VALBRO TDD“ Maximum net torque 96 Nm to integrated 9750 rpm Type ignition-injection system. Inductive discharge FUEL electronic ignition, Recommended fuel Lead-free premium “Multipoint”...
  • Page 47 Tornado Tre 1130 Rear Rear Single steel disc Type Progressive mono Disc diameter 240 mm (9.5 in) damper wheelbase Caliper 2-piston regulation, extension Calipers, piston 32 mm (1.3 in) Type braking, compression diameters braking, high-speed compression braking, RIMS spring-loaded. Front Swingarm Aluminium alloy Type...

  • Page 48: Power Control System

    Tornado Tre 1130 Power Control System - - - - - Only for models where foreseen P C S -OFF- standard P C S -ON- economy Tornado Tre 1130 Power Control System Activation This system allows to select two different settings of the tune: STANDARD: With botton in OFF position (light on) the engine performs 163 hp (119 KW*) ECONOMY:...

  • Page 49: For United States Of America Version Only

    This warranty extends to the first person who buys this exhaust system for purposes other than resale, and to all subsequent buyers. Warranty claims should be directed to: Benelli America, LLC - Tel. +1 7245936208 Tornado Tre 1130...
  • Page 50 Otherwise, the owner may become subject to penalties under state and local ordinances. Problems that may affect motorcycle emissions If you are aware of any of the following symptoms, have the vehicle inspected and repaired by a Benelli’s autorized centre. Symptoms: •...

  • Page 51: Refuelling

    Don’t drink and ride. Vehicle identification number (VIN): The vehicles identify by anumber (see chapter number 1.2) Z B N T R 1 Factory Vehicle Variants Check Model Factory code type digit year place BENELLI versions...
  • Page 52 Tornado Tre 1130 Evaporation emission system This system consists of 1) Left intake manifold; 2) Jet; 3) Carbon canister; 4) Fuel tank; 5) Fuel tank - bottom view Tornado Tre 1130 Tornado Tre 1130 Labels USA...
  • Page 53 Warranty on emission control system Benelli Q.J. s.r.l. - Strada della Fornace Vecchia s.n. - 61100 Pesaro - Italy warrants that each new 2005 and later Benelli motorcycle, that includes as standard equipment a headlight, tail-light and stoplight, and is street legal: A) is designed, built and equipped so as to conform at the time of initial retail purchase with all applicable regulations of the United States Environmental Protection Agency, and the California Air Resources Board;...

  • Page 54: Adjustments

    This warranty does not cover inconvenience or loss of use of the motorcycle or transportation of the motorcycle to or from the Benelli dealer. Benelli shell not be liable for any other expenses, loss or damage, whether direct, incidental, consequential or exemplary arising in connection with the sale or use of or inability to use for any purpose.
  • Page 55 Any total or partial reproduction is forbidden. Tornado Tre 1130 Benelli Q.J. is continuously looking for advanced solutions to be used in product design and for the constant improvement of product quality. Therefore, although this CD ROM contains the most updated information on and photos of the motorcycle available on the date of its publication, there could be slight discrepancies between the motorcycle and the CD ROM.

This manual is also suitable for:

Tornado tre 900-rs

Table of Contents