Chapter 1 Introduction - NETGEAR MS510TXM Hardware Installation Manual

1
Introduction
This hardware installation guide complements the installation guide that came with your
switch and applies to the following NETGEAR switch models:
• MS510TXM: 8-Port Multi-Gigabit/10G Ethernet Smart Managed Pro Switch with 2
SFP+ Ports
• MS510TXUP: 8-Port Multi-Gigabit/10G Ethernet Ultra60 PoE++ Smart Managed
Pro Switch with 2 SFP+ Ports
The switch provides eight Gigabit Ethernet multispeed copper ports and two dedicated
SFP+ fiber uplink ports that support 1G and 10G. Four of the multispeed copper ports
support 100M, 1G, and 2.5G and each of the other four multispeed copper ports
supports 100M, 1G, 2.5G, 5G, and 10G.
Model MS510TXUP can provide Ultra60 PoE++ (802.3bt) on its eight multispeed copper
ports so that you can let the switch deliver power to PoE++ devices such as WiFi 6 access
points, security cameras, PoE speakers, and LED lighting. Model MS510TXUP can supply
up to 60W PoE++ to each copper port, with a maximum PoE power budget of 295W
across all active PoE++ ports.
This chapter serves as an introduction to the switch and includes the following sections:
• Overview
• Features
• Safety instructions and warnings
Note: For more information about the topics that are covered in this manual, visit the
support website at netgear.com/support.
Note: For technical specifications, see the data sheet at
netgear.com/business/products/switches/smart. For switch documentation, including
the installation guide and user manual, visit netgear.com/support/download.
5