2.2 Area of application
Our components perform optimally when paired with appropriate compon
ents based upon weight and mobility grades identifiable by our MOBIS clas
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 1 (indoor walk
er) and mobility grade 2 (restricted outdoor walker).
m°
kg
•
The maximum approved body weight is specified in the technical data
(see Page 18).
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60 °C
Relative humidity: no restrictions
Chemicals/moisture: fresh water, salt water, chlorine water, soapsuds, sweat, urine
Solids: dust, sand, highly hygroscopic particles (e. g. talcum)
Clean the product after contact with humidity/chemicals/solids, in order to
avoid increased wear and damage (see Page 17).
2.4 Service life
This product has been tested by the manufacturer with 2 million load cycles
according to ISO 22675. Depending on the patient's activity level, this cor
responds to a service life of 2 to 3 years.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION
Exceeding the service life and reuse on another patient
Risk of injury due to loss of functionality as well as damage to the product
► Ensure that the approved service life is not exceeded.
► Only use the product on a single patient.
13