Nortel 8600 Series Installing page 100

100 Installing Ethernet Routing Switch 8600 modules and connecting equipment
To facilitate card installation and removal, bundle the cables for each slot.
Connect, label, and bundle the cables for each module together, and then
use velcro straps or sheet fiber wrapped around the cables to organize
them along the entire cable path before you connect cables to another
module. Secure the velcro straps or sheet fiber to brackets with lacing cord
or tie wrap.
To manage cables for the 8000 Series chassis:
Step
1
2
Copyright © 2007, Nortel Networks
.
Action
Connect the appropriate cable to the module.
Route the cable up to the appropriate cable management bracket
and channel (Figure 50 "Managing cables: 8010co chassis" (page
101) and Figure 51 "Managing cables: 8010, 8006, 8003 chassis"
(page 102)).
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
Nortel Networks Confidential