Nortel 8600 Series Installing page 46

46 Ethernet Routing Switch 8600 modules
Type Label
Module Online
The Ethernet Routing Switch 8600 8648GTR is an R module and supports:
•
•
•
Refer to Network Design Guidelines for usage of table entries.
The Ethernet Routing Switch 8600 system has three hardware operating
modes:
•
•
•
The 8648GTR module supports R and M mode. For specific R and M mode
configuration requirements, see
24)
Copyright © 2007, Nortel Networks
.
Color/State
Green/Steady
Amber/Steady
Amber/Blinking
Off
256,000 IP routes
64,000 MAC records
16,000 ARP records
Default mode (32,000 table entries) supports up to 32,000 hardware
records. This mode supports all modules.
M mode (128,000 table entries) supports up to 128,000 hardware
records. This mode supports M and R modules only.
R mode supports up to:
— 256,000 IP routes
— 64,000 MAC entries
— 16,000 ARP entries
This mode supports R modules only.
and "R mode configuration requirements" (page
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
Meaning
The module has completed its
power-on self-test and software
initialization and is operating normally.
Interim boot state, non-operational.
The module failed to boot.
The switch power is off. If the switch
power is on, the module is going
through its power-on self-test and
software initialization. A module in
this state is not yet functional.
"M mode configuration requirements" (page
25).
Nortel Networks Confidential