Nortel 8600 Series Installing page 61

Table 22 " 8683XZR module LEDs" (page 61)
module LEDs.
Table 22
8683XZR module LEDs
Type Label
Port TX
RX
Module Online
See Using Ethernet Routing Switch 8600 10 Gigabit Ethernet modules for a
description of how to configure the 8683XZR module using the Command
Line Interface (CLI) or Device Manager.
The Ethernet Routing Switch 8683XZR module is an R module and
supports:
•
•
•
Refer to Network Design Guidelines for usage of table entries.
The Ethernet Routing Switch 8600 system has three hardware operating
modes:
•
•
Copyright © 2007, Nortel Networks
.
Color/State
Green/Steady
Green/Blinking
Off
Green/Steady
Green/Blinking
Amber/Steady
Green/Steady
Amber/Steady
Off
256,000 IP routes
64,000 MAC records
16,000 ARP records
Default mode (32,000 table entries) supports up to 32,000 hardware
records. This mode supports all modules.
M mode (128,000 table entries) supports up to 128,000 hardware
records. This mode supports M and R modules only.
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
8683XZR module 61
describes the 8683XZR
Meaning
The port is enabled but not transmitting
data.
The port is transmitting data.
The port is disabled.
The port has a link and is enabled.
The port is receiving data.
The cable is disconnected, the port is
disabled, or the link is down.
The module has completed its power-on
self-test and software initialization and is
operating normally.
The module slot is disabled.
The switch power is off. If the switch
power is on, the module is going through
its power-on self-test and software
initialization. A module in this state is not
yet functional.
Nortel Networks Confidential