Nortel 8600 Series Installing page 29

Figure 5 "8608GTE/8608GTM module LEDs" (page 29)
of the 8608GTE and 8608GTM module LEDs.
Figure 5
8608GTE/8608GTM module LEDs
Table 4 "8608GTE/8608GTM module LEDs" (page 29)
8608GTE and 8608GTM module LEDs.
Table 4
8608GTE/8608GTM module LEDs
Type Label
Port Link
Activity
Module Online
The 8608GTE module supports up to 32,000 table entries in its forwarding
engine. Refer to Network Design Guidelines for usage of table entries.
Copyright © 2007, Nortel Networks
.
Color/State
Green/Steady
Amber/Steady
Off
Green/Blinking
Green/Steady
Amber/Steady
Amber/Blinking
Off
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
8608GTE and 8608GTM modules 29
Meaning
The port has established a link and is enabled.
The port is connected, but an error condition
is detected.
The port is disabled or has no link.
The port is receiving data. As port utilization
increases this LED can blink so fast that it
appears to be always on.
The module has completed its power-on
self-test and software initialization and is
operating normally.
The module failed its power-on self-test.
The module is inserted into the chassis and
diagnostics are running.
The switch power is off. If the switch power is
on, the module is going through its power-on
self-test and software initialization. A module in
this state is not yet functional.
shows the location
describes the
Nortel Networks Confidential