Nortel 8600 Series Installing page 142

142 Appendix Installing the Enterprise enhanced CPU daughter card
6
7
Copyright © 2007, Nortel Networks
.
Using the hex key, secure the Mezzanine card to the 8692SF CPU
using four socket head screws (items 3 and 4 in the installation kit)
Figure 57 "Securing the CPU daughter card to the 8692SF CPU"
(page 142).
Install the #2-56 x .625 screws first. See
CPU daughter card to the 8692SF CPU" (page 142)
screw placement. Install the #2-56 x .188 screws second. These
shorter screws must be inserted in the oval holes in the sheet metal
mezzanine card bracket and not through the mezzanine card. After
the screw is placed in the hole, insert the hex key through the
mezzanine card hole to secure the screw in place.
Do not overtighten the screws. It is normal for a slight space to be
visible between the CPU daughter card and the CPU standoffs.
Figure 57
Securing the CPU daughter card to the 8692SF CPU
Replace the 8692SF (with the newly installed CPU daughter card
attached) into the vacant chassis slot (refer to
replacing a module" (page
After you reinstall the 8692SF CPU into the chassis, refer to the
appropriate chassis and component installation guide to power up
the chassis and verify a successful installation.
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
Figure 57 "Securing the
84)).
—End—
for correct
"Installing and
Nortel Networks Confidential