Nortel 8600 Series Installing page 58

58 Ethernet Routing Switch 8600 modules
Figure 29
8683XLR module LEDs
Table 20 " 8683XLR module LEDs" (page 58)
module LEDs.
Table 20
8683XLR module LEDs
Type Label
Port TX
RX
TX & RX
Module Online
See Using Ethernet Routing Switch 8600 10 Gigabit Ethernet modules for a
description of how to configure the 8683XLR module using the Command
Line Interface (CLI) or Device Manager.
Copyright © 2007, Nortel Networks
.
Color/State
Green/Steady
Green/Blinking
Off
Green/Steady
Green/Blinking
Off
Both Blinking Green
Green/Steady
Amber/Steady
Off
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
describes the 8683XLR
Meaning
The port is enabled but not transmitting
data.
The port is transmitting data.
The cable is disconnected or the link is
down.
The port has a link and is enabled.
The port is receiving data.
The cable is disconnected or the link is
down.
The port is disabled.
The module has completed its power-on
self-test and software initialization and
is operating normally.
The module slot is disabled or in the
process of software initialization.
The switch power is off or there is no
power to the card. If the switch power
is on, the module is going through
its power-on self-test and software
initialization. A module in this state is
not yet functional.
Nortel Networks Confidential