Nortel 8600 Series Installing page 31

•
Figure 7 "8608SXE module LEDs" (page 31)
8608SXE module LEDs.
Figure 7
8608SXE module LEDs
Table 5 "8608SXE module LEDs" (page 31)
LEDs.
Table 5
8608SXE module LEDs
Type Label
Port TX
RX
Module Online
Copyright © 2007, Nortel Networks
.
Up to 550 m using 50 µm multimode fiber cable
Color/State
Green/Blinking
Amber/Steady
Off
Green/Steady
Green/Blinking
Amber/Steady
Off
Green/Steady
Amber/Steady
Off
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
8608SXE module 31
shows the location of the
describes the 8608SXE module
Meaning
The port is transmitting data.
A fault condition exists on the line or on the
attached remote device.
The port has not detected a fault condition.
The port has established a link and is
enabled.
The port is receiving data.
The port has either no optical signal or no
link synchronization.
The port has signal but no link.
The module has completed its power-on
self-test and software initialization and is
operating normally.
The module failed its power-on self-test.
The switch power is off. If the switch
power is on, the module is going through
its power-on self-test and software
initialization. A module in this state is not
yet functional.
Nortel Networks Confidential