8683Posm Module - Nortel 8600 Series Installing

8683POSM module

The 8683POSM module
OC-12c/STM-4 MDA" (page
dependent adapters (MDAs). These MDAs provide MAN/WAN support
by allowing access to SONET services in the metropolitan area. You
can connect multiple campuses in a single metropolitan area without
compromising performance or increasing complexity. You can install up to
four 8683POSM modules in one 8010 10-slot chassis (four in a 8006 6-slot
chassis, and two in a 8003 3-slot chassis).
Figure 27
8683POSM module with an OC-12c/STM-4 MDA
To operate, each module requires at least one of the following MDAs:
•
•
The 8683POSM module supports a mixture of OC-3c/STM-1 and
OC-12c/STM-4 lines. For example, you can install an OC-12c/STM-4
MDA in the first bay and OC-3c/STM-1 MDAs in the two remaining bays.
This module supports up to six I/O OC-3c/STM-1 lines and up to three I/O
OC-12c/STM-4 lines.
For more information about the MDAs for the 8683POSM module, see
Installing Media Dependent Adapters for the 8683POSM Module.
The 8683POSM module has an Online LED that indicates overall status
for the module.
the Online LED
Table 18
8683POSM module LED
Color/State
Green
Amber
Off
Copyright © 2007, Nortel Networks
.
1-port OC-12c/STM-4: SMF or MMF using SONET media
2-port OC-3c/STM-1: SMF or MMF using SONET media
Table 18 "8683POSM module LED" (page 55)
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
(Figure 27 "8683POSM module with an
55)) has three bays for installing POS media
Meaning
The module is receiving power and is ready to receive
and transmit traffic.
The module is initializing and performing diagnostic
self-tests.
The module is offline and is not receiving power.
8683POSM module 55
describes
Nortel Networks Confidential