Wall Mount Installation - IDTECK 100R Quick Installation Manual
Hide thumbs
Also See for 100R:
- User manual (40 pages) ,
- Quick installation manual (16 pages) ,
- Manual (71 pages)
Table of Contents
Advertisement
3. WALL MOUNT INSTALLATION
1.
Use the provided template to drill two 6-32 holes and one 1/2" hole on the proper location of the wall
to mount the Wall Mount bracket as shown below.
2. Install wall mount to the wall using 2 screws.
3.
Insert 5 O-rings to the wall mount as indicated, then route the cable of the main unit through the center
hole and push the main unit to wall mount to lock the main unit and make sure that the main unit is
locked with wall mount.
Continued on next page.
Quick Installation Guide
7
- Quick Links:
- Wire Color Table
- System Initialization
Hide quick links:
Advertisement
Table of Contents
