Table of Contents
Advertisement
5. INSTALLATION
5.1 TEMPLATE
• Tear off last page and use provided template to drill two 6-32 holes and one ½" hole on the proper location
of the wall to mount the Wall Mount bracket as shown below.
(If the gang box is already installed on the wall then skip this step.)
• Using 2 screws, install wall mount to the wall.
* CAUTIONS *
Before mounting the STAR FINGER007 unit to the Wall Mount bracket, an operational test of the unit
should be completed, because the locking pins will lock the unit to the Wall Mount. Removing the unit from
the Wall Mount bracket after it has been snapped in place may cause damage to the bracket and prevent
reattachment.
• Insert 5 O-Rings to the Wall Mount as indicated, then run the cable from the main unit through the center
hole and snap in place the main unit to Wall Mount. Make sure that the main unit is securely locked in place
with Wall Mount.
20030516
STAR FINGER007
13
User's Manual
Hide quick links:
Advertisement
Table of Contents
