Da7 - Status Data Byte 12, Bit 6; Da8 - Status Data Byte 12, Bit 7; Da9 - Status Data Byte 14, Bit 0; Da10 - Status Data Byte 14, Bit 1 - AJA Ki Pro Ultra Machine Control Manual

3.44 DA7 – Status Data Byte 12, Bit 6
This bit reflects the DA7 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.45 DA8 – Status Data Byte 12, Bit 7
This bit reflects the DA8 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.46 DA9 – Status Data Byte 14, Bit 0
This bit reflects the DA9 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.47 DA10 – Status Data Byte 14, Bit 1
This bit reflects the DA10 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.48 DA11 – Status Data Byte 14, Bit 2
This bit reflects the DA11 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.49 DA12 – Status Data Byte 14, Bit 3
This bit reflects the DA12 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
Ki Pro Ultra Products Machine Control Guide v3.0 22 www.aja.com