Status Data Byte 10, Bit 1 - Deterministic Play Ready; Status Data Byte 12, Bit 0 - Da1; Status Data Byte 12, Bit 1 - Da2; Status Data Byte 12, Bit 2 - Da3 - AJA Ki Pro Ultra Control Manual

3.42. Status Data Byte 10, Bit 1 – Deterministic Play Ready
This bit will be high whenever the device is ready for deterministic playback.
This will happen sometime after the device has been armed for deterministic
playback. Only after this bit is high will deterministic playback be assured to be
frame accurate.
3.43. Status Data Byte 12, Bit 0 – DA1
This bit reflects the DA1 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.44. Status Data Byte 12, Bit 1 – DA2
This bit reflects the DA2 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.45. Status Data Byte 12, Bit 2 – DA3
This bit reflects the DA3 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.46. Status Data Byte 12, Bit 3 – DA4
This bit reflects the DA4 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.47. Status Data Byte 12, Bit 4 – DA5
This bit reflects the DA5 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.48. Status Data Byte 12, Bit 5 – DA6
This bit reflects the DA6 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
Ki Pro Ultra and Ki Pro Ultra Plus Machine Control Guide 21 www.aja.com