AJA Ki Pro Ultra Machine Control Manual page 17

Chapter 3 – Status Data
3.0 Status Overview
The following status bits are supported by the Ki Pro Ultra and Ki Pro Ultra Plus:
Figure 5. Supported Status Data
DATA
0x00
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0A
0x0B
0x0C
0x0D
0x0E
0x0F
3. 1 Local – Status Data Byte 0, Bit 0
This bit will be high when the device is under RS-422 control via the 35.2 "Remote
Control" configuration setting. When not under RS-422 control, the RS-422 port
will still service requests for information (ex: current timecode or clip index),
but will not service any commands which require action by the device. These
commands will, however, still be ACK'ed.
3.2 Play – Status Data Byte 1, Bit 0
This bit will be high whenever the device is in normal speed playback or record.
3.3 Record – Status Data Byte 1, Bit 1
This bit will be high whenever the device is in record or has started an edit
operation has been started.
Ki Pro Ultra Products Machine Control Guide v3.0
BIT-7 BIT-6 BIT-5
STANDBY TENSION STOP
ON RELEASE
SERVO SHUTTLE
LOCK
AUTO
MODE
SELECT FULL EE
EE ON ON
INSERT ASSEMBLE
STILL FWD
LED ON LED ON
DA8 DA7 DA6
BIT-4 BIT-3
EJECT REWIND
JOG VAR
AUDIO
OUT
EDIT
VIDEO
REV
LED ON
CF LOCK
DA5 DA4
DA12
17
BIT-2 BIT-1 BIT-0
LOCAL
FAST FWD REC PLAY
REVERSE STILL CUE UP
COMPLETE
AUDIO IN OUT IN
AUTO EDIT CUE UP
TIME A2 (CUE) A1 (CUE)
CODE
DET PLAY DET PLAY
READY ARMED
DA3 DA2 DA1
DA11 DA10 DA9
www.aja.com