Otto Bock Genium Protector 4X880 Series Instructions For Use Manual page 9

4 Safety
4.1 Explanation of Warning Symbols
Warning regarding possible risks of accident or injury.
CAUTION
NOTICE Warning regarding possible technical damage.
4.2 Structure of the safety instructions
CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
> E.g.: Consequence 1 in case of failure to observe the hazard
> E.g.: Consequence 2 in case of failure to observe the hazard
► This symbol identifies activities/actions that must be observed/carried out in order to avert
the hazard.
4.3 General Safety Instructions
CAUTION
Non-observance of safety instructions
Injury due to product damage or malfunction.
► Follow the safety instructions and the precautions specified in this accompanying document.
CAUTION
Incorrect assembly
Injury due to faulty operation or malfunction of the product.
► Observe the following sections in these instructions for use.
NOTICE
Penetration of dirt and moisture
Malfunction due to damage to the product.
► Ensure that neither solid particles nor liquids can penetrate into the product.
NOTICE
Operating the product outside of the permissible temperature range
Malfunction due to damage to the product.
► Avoid operating the product in areas with extremely high or low temperatures. The section
"Technical Data" contains information on the allowable temperature range.
INFORMATION
When the protector is installed, the battery charger cable has to point to the upper closure. A
correct knee joint charging process is only ensured with this alignment.
Ottobock | 9