Otto Bock Genium Protector 4X880 Series Instructions For Use Manual page 11

► Only clean the product with a damp cloth and mild soap (e.g. 453H10=1 Ottobock Der­
maClean).
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
8 Legal Information
8.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregard of this document, particularly due to improper use or unauthorised
modification of the product.
8.2 Trademarks
All product names mentioned in this document are subject without restriction to the respective
applicable trademark laws and are the property of the respective owners.
All brands, trade names or company names may be registered trademarks and are the property of
the respective owners.
Should trademarks used in this document fail to be explicitly identified as such, this does not justi­
fy the conclusion that the denotation in question is free of third-party rights.
9 Appendices
9.1 Symbols Used
Lot number
9.2 Technical data
Ambient Conditions
Storage and transport in original packaging
Storage and transport without packaging
Operation
General
Reference number
Product service life
Protector weight (with closures)
Foot cuff weight
1 Avant-propos
INFORMATION
Date de la dernière mise à jour : 2014-12-15
► Veuillez lire attentivement l'intégralité de ce document avant d'utiliser le produit.
Respectez les consignes de sécurité afin d'éviter toute blessure et endommagement du pro­
►
duit.
-25 °C/-13 °F to 70 °C/158 °F
-10 °C/14 °F to 60 °C/140 °F
max. 100% relative humidity, non-condensing
-10 °C/14 °F to 60 °C/140 °F
max. 100% relative humidity, non-condensing
4X880=*
Wear part subject to normal wear and tear
450 g
approx. 60 g
Français
Ottobock | 11