7. Proceed according to the type of hydraulic couplers or fittings used on the M205:
• If the M205 is equipped with quick couplers (A) to connect to
the header, proceed to
– M205 With Quick Couplers, page
• If the M205 uses union fittings (A) instead of quick couplers
to connect to the header, remove union fittings (A) from the
steel lines, and proceed to
Components – M205 Without Quick Couplers, page
• If the M205 has plugs (A) installed in the steel lines and
3.1.2 Installing Hydraulic Components – M205
proceed to
Without Quick Couplers, page
215276
INSTALLATION INSTRUCTIONS
3.1.1 Installing Hydraulic Components
9.
3.1.2 Installing Hydraulic
11.
Figure 3.4: Pressure and Return Steel Lines with Quick
Couplers
11.
Figure 3.5: Pressure and Return Steel Lines with Union
Fittings
Figure 3.6: Pressure and Return Steel Lines with Plugs
8
A
A
A
A
A
Revision A