Inserting The Battery - TechniSat DIGITRADIO 216 Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Start the first scan at a window in the direction of the transmission mast.
When the weather conditions are poor, DAB reception may be limited.
You can find the optimum antenna alignment using the signal intensity display in the status bar and
hence find the best installation location.

5.3.3 Inserting the battery

>
Open the battery compartment on the rear of the device by pressing gently on the arrows on the
battery compartment cover and sliding the cover in the direction of the arrows to remove the cover.
>
Remove any batteries in the compartment.
>
Insert new Mignon (AA) batteries/charged rechargeable batteries with the correct polarity as shown
on the battery compartment.
>
Place the battery compartment cover onto the battery compartment and slide it in the opposite
direction to the arrows until it clicks into place.
Promptly change a battery that is losing power.
Leaking batteries can cause damage to the remote control.
If the device is not being used for a prolonged period, remove the batteries.
Important information for disposal: batteries can contain poisonous substances that harm the
environment. Therefore, it is imperative that batteries are disposed of according to the legal
provisions in force. Never dispose of batteries in normal household waste.
EN
FR
NL
IT
DE
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

0020/4995

Table of Contents