Table of Contents
Advertisement
2.3 LAN Configuration
By default, your X5v or V3 is set up to act as a DHCP server. A
DHCP server maintains and distributes a pool of IP addresses for
each computer on a network. Thus, you do not have to configure
each computer separately with an IP address and other related
information.
Should you want to change your DHCP server settings—for
example, if you already have a router or modem connected to your
network and you are replacing it with your X5v or V3, but you
want to use the pre-existing static IP addresses—click the LAN
Settings button on the Advanced Setup page.
Entry
IP Address
X5v or V3's IP address. The default is 10.0.0.2.
Subnet Mask
X5v or V3's subnet mask address. The default is
255.255.255.0.
DHCP Server
Enabled by default. The X5v or V3 automatically assigns
IP addresses to any computers connected to it.
Explanation
29
Advertisement
Table of Contents
