Table of Contents
Advertisement
Garbage Timeout
The number of seconds after which an invalid route is
removed from the table.
Advanced
Select this option to display the route configuration
Configuration
screen, which contains the same options as the Route
Table screen shown on page 35.
Entry
Explanation
Destination
Enter the IP address of the network or subnet
Netmask
Enter the subnet mask address that corresponds to
the Destination's IP address.
Gateway
Enter or select the IP address of the Gateway that is
on the same network or subnet as the X5v or V3.
Click Specify IP to enter a static IP address manually.
If you need help determining the Gateway's IP
address, at the Gateway computer's command
prompt, type ipconfig /all.
Click Select Interface to choose an interface from the
list.
Add
Select Add to add a new route. After you click Save
Changes and Write to Flash, the new route will
appear in the Manually Configured Routes table at
the bottom of the page. As you add entries to the
table, the X5v or V3 automatically assigns sequential
ID numbers in the (#) column.
To remove an entry, in the Destination and Netmask
fields enter the relevant IP addresses and then select
Delete. (You do not have to enter the Gateway IP
address.)
41
Advertisement
Table of Contents
