Zoom X5v Technical Reference page 15

Any numeric X
digit
Any digit but 0 N
or 1
Timeout ty
Repeat Digit .y
Exclude Digit !digit/range
Suffix digit >y
If the dial plan string is left empty, a default dial pattern to accept
all dialed digits will be incorporated
Service Definitions
The following table lists supplementary and other services, and the
default dial-pad code strings that invoke them:
servicecode Service
1 Enable Unconditional Call Forwarding
2 Disable Unconditional Call Forwarding
3
Enable Call Forwarding on Busy
4 Enable Call Forwarding on No Answer
11 Temporarily disable Call Waiting
12 Call Return
16 Blind Transfer
18 IP or Peer-To-Peer Dialing
group: e.g., [135–7] matches 1, 3, 5,
6 or 7.
X or x signifies any of the digits [0–9].
N or n signifies any of the digits [2–
9].
The character following t specifies
the timeout interval in seconds
following the preceding event. The
letters a through z are used to
represent 10 through 35.
To match a character or range
repeatedly, follow the character or
range with . and a character that
specifies the number of repetitions,
from 1 to 16 (the letters a through f
are used to represent 10 through 16).
An exclamation point followed by a
digit or a range specifies digits that
are disallowed at this position in the
pattern. Disallowed digits result in no
match with the pattern.
The DTMF digit following the >
character is the suffix character
associated with this pattern. The
characters appearing before the >
represent the minimum number of
characters to qualify as a match for
this pattern.
Default
*72
*73
*74
*75
*70
*69
*90
*47
15