Zoom X5v Technical Reference page 24

Peak Cell Rate
Sustainable Cell Rate
Max Burst Size
Encapsulation (X5v only)
Click the dropdown arrow
Default Gateway
Enter an IP address in the Default Gateway field only if you want
to connect your gateway to the Internet via a different gateway
router, or if your service provider has instructed you to change the
address.
IGMP (Internet Group Management Protocol)
IGMP is the Internet standard for IP multicasting, or broadcasting
a message to many recipients simultaneously. The default is
Disabled.
To enable IGMP, you must first do the following: Go to the
Advanced Setup page, click Misc Configuration, select Enabled
in the IGMP Proxy dropdown list, and click Save Changes and
Write Settings to Flash and Reboot. Then return to this page
and select Enabled. If you don't follow these directions, enabling
IGMP on this page will not have any effect.
PPP (Point-to-Point Protocol)
PPP is the most widely used protocol for authenticating a
connection to the Internet. If you change service providers, you
may need to change the data in these fields.
Entry
User Name
Password
Service Name
Disconnect Timeout
24
only if you have arranged to do so with your
provider.
CBR only. Supplied by your service provider.
CBR only. Supplied by your service provider.
CBR only. Supplied by your service provider.
to select the encapsulation type.
Explanation
Supplied by your service provider.
Supplied by your service provider.
Optional. If necessary, supplied by your service
provider.
PPP connection will be dropped after the line is
idle for a certain amount of time (measured in
minutes). Select 0 to ensure that you won't be
disconnected.