Table of Contents
Advertisement
Entry
Explanation
HTTP server
The default is Restricted LAN. Choices are All (WAN
access
and LAN); Restricted WAN and/or LAN. If restricting
WAN access, be sure to fill in the IP address and
subnet mask address of the device that is
communicating in from the Internet.
HTTP server port
Port number to use for Web access; for example, if you
change it to 1001, the gateway's HTTP server address
on either side would be http://10.0.0.2:1001.
HTTP Password
The default is Enabled.
Protection
FTP server
Disabled by default. Enabling this feature is useful
strictly for Technical Support diagnostics.
DHCP Relay
Disabled by default. Some service providers perform
the DHCP server function for their customers'
37
Advertisement
Table of Contents
