Zoom X5v Technical Reference page 13

Hook Flash Max Time
Debounce ON OFF
Time
Debounce OFF ON
Time
Timer Configuration
In the following fields the unit of time is seconds.
Entry
Predial Timer
Call Progress Timer
Alert Timer
Call Waiting Timer
Disconnect Timer
CallFwdNoAnsTimer
Ringback Timer
The default is 1000 milliseconds (one second). If
a hook flash (pressing the button on the phone's
receiver or cradle) is longer than the unit of time
entered here, the X5v or V3 will interpret it as an
on hook event (not in use). This function is tied to
Call Waiting.
Minimum time to detect that phone is off hook (in
use)
Minimum time to detect a hook flash (pressing the
hook button on the phone's receiver or cradle).
Explanation
The interval of time the unit waits for someone to
start dialing after the phone has been taken off
hook (in use). After this interval, the unit sends
ROH (Receiver Off Hook) notification. The default
is 16.
The interval between the time a caller places a
call and the time the connection is terminated if
no one answers the call. The default is 60.
The interval between the time a call rings at the
X5v or V3 user's location and the time the
connection is terminated if the user does not
answer the call. The default is 60.
The period of time during which the call waiting
tone will be played at intervals to alert the user
that a call is waiting. The default is 40 seconds.
The interval of time between when a callee
terminates a call and when the X5v or V3 user
hears a fast-busy tone. The default is 10.
The interval of time that will elapse before a call is
forwarded if "call forwarding on no answer" is
enabled. Note: Each ring takes about 5-6
seconds, so if, for example, you wanted calls to
be forwarded after four rings, you would enter 20-
24 seconds. The default is 30.
The interval of time that will elapse between when
the X5v or V3 places a call and when the
connection is terminated if no one answers the
call. The default is 60.
13