Save And Restore Configuration Settings - CyberPower PDU33 Series User Manual

Save and Restore Configuration Settings

Save and Restore Configuration Settings
Option 1: via Web interface
You can easily save and restore the device configuration to your local PC on System > About.
To save the configuration file, click "Save" to save the configuration to your local PC. The text file will
have a default format of YYYY_MM_DD_HHMM.txt. To restore configuration, click "Browse" to the
location of the saved configuration file and click "Submit" to restore a configuration that has been
saved earlier.
Option 2: Use Secure Copy (SCP) command
Use the following steps to restore configuration via SCP.
Note: Only firmware version 1.1.2 and above supports the functionality to restore configuration via
SCP.
For Windows Users:
1. Download any PuTTY Secure Copy client (PSCP) utility.
2. Save the configuration file and the PSCP Utility in the same folder.
3. Open the Command Line Interface and change the path to where the configuration file and the
PSCP Utility are saved.
4. Enter the following command to restore configuration:
pscp –scp <filename> <user>@<IP address of PDU>:
79
3-Phase Intelligent PDU User Guide