Table of Contents
Advertisement
Wake on LAN (WoL)
When turning on an outlet, a Wake on LAN packet can be sent to the connected computer to
awaken it. It is necessary for the computer to support this function and is configured as "Enabled" in
its BIOS settings. See
(For Switched Metered by Outlet Series and Switched Series only.)
Item
PowerPanel Client
Wake Conditions
3-Phase Intelligent PDU User Guide
PDU Tab > Wake on LAN > Features and PDU Tab > Wake on LAN > Lists.
PDU Tab > Wake on LAN > Features
Load/Sync with PowerPanel Client List. To achieve synchronization,
make sure the PDU has established communication with PowerPanel®
Business Edition Client software. See
Authentication.
Enable or disable the Wake on LAN function.
Definition
System Tab > Security >
Web Interface
46
Advertisement
Table of Contents
