Advanced Settings - CyberPower PDU15SW8FNET User Manual

Appendix B-Power Device Network Utility
Step 2. Assign a valid IP Address to the PDU
Option 1: Assisted Setup (recommended)
With the appropriate device selected from the Equipment List, open the Network
Settings menu (Shown in Figure 6.). [Tools=>Device Setup]. In the Device Network
Setting Menu, enter a valid IP address, subnet mask, and gateway address to
setup the PDU device.
Note: The DHCP option is not available for all power devices.
Step 3. Authentication
Enter the user name and password of the PDU device at the Authentication menu
(Shown in Figure 7.).
Note: The default username is "cyber" and the default password is "cyber".
•

Advanced Settings

Timeout Settings
The Timeout Setting (Shown in Figure 8.). [Edit=>Timeout Settings] is used to
specify the wait time when scanning for network PDU devices. When there are
many devices on the local network, it may take extended periods of time to locate
all the devices. The timeout function is used to limit the search time.
The default setting is 3 seconds. Valid values are 3 to 60 seconds.
For more information on CyberPower products, visit www.CPSww.com
Figure 6. Network Setting Menu (Device Setup)
Figure 7. Authentication screen
Figure 8. Timeout Setting
25